Tank buster mk1 upgrade#

Points as needed for the development and execution of the

Units will draw from pre-stock points or Ammunition Transfer Load of AT mines contingent upon their mission. Combat and Combat Support units may be authorized a basic The responsibility forĪuthorizing the employment of the mines is vested in theĬommander whose area is directly affected by the mines.īASIS OF ISSUE: AT mines are Class V items of An accurate record of the number of mines laidĪnd their exact location is maintained. He has more health and deals more damage than his counterpart, and there are more surprises awaiting once you pull. Only the M15 AT mine can be emplaced with the M57 Anti-Tank Mineĭispensing System. Instead of the usual Tank Buster MK1, you will instead see the Tank Buster MK2 awaits you. They canīe buried by hand or mechanically or can be surface-emplaced. Protective, tactical, point and interdiction minefields. NoĮMPLOYMENT CONCEPT: AT mines are employed in

Tank buster mk1 upgrade#

Rehabilitation program is underway to upgrade the stockpile. Well and the explosive charge of the M15 have deteriorated and a Last procured in FY52, FY58 and FY62 respectively. STATUS: The M15, M19 and M21 AT mines were The M21 is not compatible with any mechanical mine-dispensing If the M21 is surface-laid with a tilt rod, it must be staked to prevent it from being knocked over and causing the warhead to be directed away from the target. It can be buried with a tilt rod, or it can be surface-laid with or without a tilt rod. The M21 produces a kill against heavy tanks, unless the mine isĪctivated under the track. It uses a Miznay-Schardin plateįor direct-energy warhead a kill mechanism providing belly kill and track breakingĬapability. Long extension rod or, without rod, by 290 pounds of vertical The mine is activated by 4 pounds of pressure against a 21 inch Weighs a total of 17 pounds with 11 pounds of high explosives. M21 AT Mine is 9 inches in diameter and 4-1/2 inches high. When the M19 is employed, it isĭifficult to detect because of its plastic construction. The mine is activated by 400 pounds of pressure and is a track breaker. The fuse body contains a pressure plate, a Belleville spring, a setting knob, a step plate, a firing-pin assembly, and a detonator. It consists of an M606 integral pressure fuse and two secondary fuse wells-one in the side and one in the bottom. The M19 AT mine is housed in a square, plastic case and holds 9.45 kilograms of Compositionī (HE charge). In diameter, 4-7/8 inches high, and weighs 30 pounds with 22